Local Jobs

Contact ASMI Cleveland web chair for information on posting job listings here:

Mohsen Seifi: This email address is being protected from spambots. You need JavaScript enabled to view it.

All Jobs

Visit ASMI’s Career Center for national & international job searches

ASMI Career Center link


Senior Metallographic Technician - (009434)
Eaton Corporation located in Euclid, OH has an opening for a Senior Metallographic Technician.  This role will be responsible for performing a wide variety of testing duties in the Metallurgical Laboratory. The role requires a specialized knowledge of laboratory test equipment, techniques and procedures.  This person must be able to perform duties with minimum supervision, be highly motivated, and have a broad knowledge of industrial and military specifications.
Essential Functions:
·         Conduct specific material evaluations, interpret data to instructions and Eaton standards.
·         Knowledge of metallurgical techniques such as nitride evaluations, weld evaluations, IGA testing, microhardness, grain size, and polishing methods.
·         Trained in operation of equipment such as optical microscopes, cut-off saws, grinders, automatic polishers, and mounting presses.
·         Apply applicable specifications, standards and procedures to recognize conditions which may affect the quality of material or parts.
·         Set-up and maintain current, precise and systematic records for the quality system.
·         Communicate (both orally and written) in a precise, logical, informative and tactful manner.
·         Perform such other duties, which may be assigned as necessary.
Preferred Qualifications: 
Bachelor degree preferred, with a major in metallurgy or materials science; or equivalent work experience. 
Training in metallographic testing by industrial/professional societies is preferred.
Experience in metallurgical testing with extensive knowledge of microstructures, metallographic techniques, Rockwell, Brinell and microhardness testing.
Experience in specific disciplines to maintain a Level III status based on the Eaton and NADCAP Quality Systems.
Proficient in ASTM procedures.

Metallurgical Laboratory Intern

Position Summary:
  • Laboratory technician will work under close supervision to prepare materials for sawing, machining and evaluation.  
  • Participate in the preparation of samples for evaluation.  
  • Work is completed in accordance with detailed and controlled laboratory procedures.  
  • Technician may gather and maintain specified records of data. 
  • Assist with miscellaneous administrative duties.  

Essential Functions*:

  1. Prepares samples for analysis
    • Prepares various test samples for machining utilizing various saws
    • May use equipment such as saws, CNC Turning Centers and CNC Vertical Mills.
    • May work in various departments or areas as needed.
  2. Manages samples and data
    • Manage samples and records appropriate data.
  3. Cleans and Maintains equipment
    • Cleans lab facilities and equipment
    • Stores supplies and does routine equipment maintenance as needed.
  4. Assists in the laboratory
    • Assists lab personnel in performing laboratory procedures for evaluation of samples.
    • May be assigned administrative duties.
    • Adheres to all safety and quality standards.

*The job description documents the general nature and level of work but is not intended to be a comprehensive list of all activities, duties and responsibilities required of job incumbents. Consequently, job incumbents may be asked to perform other duties or work overtime as required.

Qualifications (Knowledge, Skills, Abilities, Education, Experience):

  • High school graduate with one year of Technical Training. Associates Degree in Science of Engineering preferred.
  • Willingness to learn new tasks.
  • Good basic math skills.
  • Attention to detail with the ability to organize and multi-task. 
  • Ability to work in a team environment.
Success Factors:
  • Ability to establish and maintain cooperative working relationships.
  • Ability to follow oral and written instructions.
Work Conditions and Physical Demands:
  • General lab environment:  includes sitting, standing and walking; infrequent lifting of up to 20 lbs., pulling, pushing, carrying, reaching, bending, twisting, climbing, squatting, and crouching.  
  • Work is completed in the lab environment that contains toxic materials with possible exposure to odors, acids, fumes and other reactive materials. 

NSL Analytical offers the opportunity to work with talented, dedicated colleagues in a state-of-the-art laboratory environment. For consideration, please send resume with salary requirements to be considered for this position to This email address is being protected from spambots. You need JavaScript enabled to view it..


Quality Engineer:

For more information and apply download job description from here.

Eaton Corporation is a diversified power management company with more than 100 years of experience providing energy-efficient solutions that help our customers effectively manage electrical, hydraulic and mechanical power. With 2012 sales of $21.8 billion, Eaton is a global technology leader in electrical components and systems for power quality, distribution and control; hydraulics components, systems and services for industrial and mobile equipment; aerospace fuel, hydraulic and pneumatic systems for commercial and military use; and truck and automotive drivetrain and powertrain systems for performance, fuel economy and safety. Eaton has approximately 103,000 employees and sells products to customers in more than 175 countries

Eaton Aerospace Group has a need for a quality engineer which will provide quality support to the team responsible for the manufacture, assembly and testing of internally manufactured products. In addition, supports issues such as MRB review, Cost Out, Reduction in DPPM, and Improvement Initiatives. 

Critical for success in this role is the ability to:

•   Drive reductions in Defective Parts per Million (DPPM) and improvement in First Pass Yield (FPY) of manufactured products. 

•   Review Engineering drawings and changes to assure that they are properly dimensioned and conform to GD&T protocol, and provide proper inspectability for the related component.

•   Respond to customer corrective action requests including full root cause analysis, determination of permanent corrective actions, and implementation and follow-up of corrective actions.

•   Collaborate with Design Engineering, Manufacturing Engineering, customers, and suppliers to improve manufacturing processes and develop methods to eliminate quality problems - Position requires interaction with external customers and internal personnel at all levels of the organization. Interaction is quite often providing the controlled interface between an Eaton manufacturing supplier (both internal and external) and the Eaton customer.

•   Work with customer, government and other regulatory representatives to interpret or reach agreement on Quality procedures, and acceptability of products and assure compliance with the specified customer and government requirements.

•   Investigate and resolve internal and external product quality problems utilizing quality functional tools such as statistical and analytical tools, PFMEAs, and process capability studies.

•   Review customer rejected hardware to determine cause and corrective action.  

•   Utilize product audit process to suggest process and/or design changes to improve producibility and/or yield. Implement standard work; identify cost out opportunities, in order to drive continuous improvements in products and processes.

•   Maintain accurate records to comply with company and customer record retention requirements.


Manufacturing Engineer at Chromium Corporation:

Chromium Corporation subsidiary of BMCA is a leading metal finisher of proprietary hard chrome finishes for original equipment and recycled internal combustion engine cylinder liners for the railroad, marine, and stationary power industries. In addition, Chromium remanufactures diesel engine components such as cylinder liner, pistons and water jackets. Crodon wear plates is another fast growing product of Chromium Corporation, which primarily used for wear resistance and material flow in mining and aggregate industries This group has an immediate opening for a Manufacturing Engineer in Cleveland, Ohio facility. If you are motivated, creative, and passionate about your career growth, we'd like to hear from you!

Click here for detailed job description!


Process Development Engineer - Additive Manufacturing at ATC (ALCOA Technical Center, PA):

For more information and apply visit:

Position Description: Alcoa has an exciting opportunity for a Process Development Engineer to work at the Alcoa Technical Center (ATC) located in Alcoa Center (New Kensington) PA, a suburb of Pittsburgh. The Alcoa Technical Center is Alcoa’s largest research, development, and applied engineering laboratory. Alcoa Technical Center occupies a 127-acre campus with an additional 2,019 acres of rolling countryside. This facility is the world’s largest light metals research and development center with a full range of lab capabilities, from bench-scale to full production-scale equipment. The facility has a diverse, multi-lingual workforce holding more than 100 Doctorate and 200 Master’s Degrees.

The position of Process Development Engineer – Additive Manufacturing (AM) is a newly created position within Alcoa. Additive manufacturing (AM) technologies are advancing at a rapid pace, enabled by a significant increase in federal and private sector funding. The potential for additive manufacturing technologies to change the landscape of future products, supply chains and supply chain participants is very high. Alcoa must develop and advance internal technical and, product and process development capabilities while defining and executing against a well defined strategy. We are looking for an individual with experience in additive manufacturing technologies to lead the development and optimization of powder AM processes for a range of materials. 
Some ATC products and technical information are subject to U.S. export control laws. You may be required to submit information regarding work authorization status to enable ATC to comply with those laws.
This position is being posted at a range of job grades 16-17. Job grade will be dependent on education and experience level of the incumbent.
Basic Qualifications
BS in Materials Science or Engineering with 3+ years product design experience
Ability to design and execute experiments that test key hypotheses
Ability to use basic statistical methods to design experiments and analyze results to separate commingled variables
Basic understanding of the influence and interactions between design, material characteristics, process conditions and final part quality
Preferred Qualifications
MS in Materials Science or Engineering with 1-3 years product design experience
Experience with and understanding of key parameters for powder based or wire fed additive manufacturing processes and technologies


Metallurgist for a specialty steel company:

Located in the Canton area. Compensation up to $85K based on years of experience. The focus of this position would be plant/process metallurgy.


Terry Richards, Principal

Terry Richards CPC

36 Public Square, Suite 105

Willoughby, Ohio 44094


This email address is being protected from spambots. You need JavaScript enabled to view it.


Cold Rolling Metallurgical Engineer/ Cold Roll:

Cold Rolling or galvanize coating background highly desired. Steel producer close to the Youngstown/Warren OH area seeking Metallurgist to provide technical support to operations, sales and customers for all phases of steel operations as well as ensure quality procedures are in place and practiced and to provide metallurgical support to management. 

 Development of new grades and processes to meet customer requirements. Provide technical support for all operations.  Ensure established procedures and sound metallurgical practices are followed. Other related duties as deemed necessary. This is a professional, full-time, direct hire opportunity offering a competitive compensation package including a salary commensurate with experience and a generous benefits package.

BS Metallurgy or Material Science or equivalent level of related experience and education. Min 2 years’ experience with steel process/products. Salary is totally open for the right type and length of experience. Company wants this person to be able to lead and support this function for the future development and optimization of product and process!

BS Metallurgical or Materials Engineer needed for  eastern  PA. Company is located west of Philly. They will take 1 year manufacturing experience minimum with Metl & quality STDs (ISO 9001). Heavy industry is a must, metals preferred. Metals rolling experience is preferred for higher salary

HB Consultants LLC, a contingency search firm specializing in the steel and metals industries, has the following jobs open.  If interested, please email resume to This email address is being protected from spambots. You need JavaScript enabled to view it. or call 330.759.8700



EAF/Casting experience . Chicago area  steel industry mini mill. Excellent benefits and relocation assistance. Work with EAF Melt Shop / Continuous Slab Casting processes to participate in new product development, process improvement and quality improvement.

Assist in developing new products - defining related melting, refining and casting standard practices. Oversee slab quality evaluation programs (scarfing).  Serve as a key player in the Scrap Quality Management System. Work with Operations to improve Slab Yard logistics and slab handling. Participate in all CAPEX project work at caster and slab yard where there are product quality elements. Serve as an operational resource as needed for failure analysis and investigations in Casting Operational issues.  Generate improved efficiency of casting processes and systems.

BS Metallurgical Engineering and 3+ years of experience with carbon steel melting and particularly continuous slab casting processes.

BS Metallurgical or Materials Engineer needed for  eastern  PA. Company is located west of Philly. They will take 1 year manufacturing experience minimum with Metl & quality STDs (ISO 9001). Heavy industry is a must, metals preferred. Metals rolling experience is preferred for higher salary

HB Consultants LLC, a contingency search firm specializing in the steel and metals industries, has the following jobs open.  If interested, please email resume to This email address is being protected from spambots. You need JavaScript enabled to view it. or call 330.759.8700